SmartBus Low Current Relay Module G4 - SB-3R-UN

Mini Sized 3-Relay Module to Control Any Needed Small Loads from Low current devices as trigger, momentary, or latching operation. This 3R Module fits inside any Back box as well inside third party Panels. Some of the applications to use this module are: Siren, Flasher, Integration to Auto Dialers and third Party Alarm systems, Door Lock release, Gate motor, Curtains ++. Also the Module can be used for very low AC Applications with very low loads like: Lighting (on/Off). (Kindly Refer to Load Rating Guide)
**Added function: Bigger screw terminals, Broadcast button, and mini USB firmware upgrade port.

TECHNICAL DATA:

Outputs 3 Addressable Outputs (Contacts). Load Rating Range This Module is Meant to be used mainly with Low Current applications. Rating Guide: 12-30VDC= 2A 110VAC = 0.5A 220VAC = 0.25A * Load Warning: * Do not Use with Fluorescent nor with CFL fixtures Control IO 1 x Advanced RS485 S-BUS serial port links (both train & screw link types) Upgrade IO 1 x mini USB port (to connect to special programming board) User Controls • LED status indicator/channel • Diagnostic LED+ BROADCAST Programming • Advanced Software Configuration & Programming Compliance CE Mark EMC ROHs, CPT UL Listed Relays Inside

Operation Protection • BUS Rv. Polarity Protection • BUS Short Circuit Protection Applications Door Lock Release, Siren, Flasher Trigger, Alarm System Integration, Curtain Motor Control, Low Load Lighting, Gate / Garage Motor Trigger..etc. Trigger Function Software Selectable NO NC Momentary Latch Double Throw SBUS DC Supply 24VDC with flexible tolerance between 8-36VDC. Flexible ability to add power supply as to be needed any where Power consumption: 15mA Installation • universal Mount Ready Operating Environment 0º to 45ºC ambient temperature 20% to 93% RH Enclosure material APS Polycarbonate, Dimensions & Weight W 46mm x L 46mm x H 16mm Packed weight 0.06 kg

---

http://www.smarthomebus.com (Home Automation Control DRP System)
http://www.sunseeker.me (Motorized Shades, Drapes & Lifts)
http://www.zone-audio.com (Multi-room Distributed Audio System)
http://www.resound.me (Theatre Art Speaker and Garden Hi-end Autosystem)
http://www.oursmartwall.com (Specialized in Automation and A&V Industry Social) 

Smart-Bus Flourescent Ballast (0V-10V) Dimmer 16A/Ch (G4) - SB-6B0-10V-DN

Description

DIN-Rail Mount, 6 Channel 0-10V Ballast controller. To dim your Fluorescent Tube Lights and save tube Lights energy also gives different mood lighting in the room for a more comfortable lighting for the human eyes. It Can Control 6 channel, each can handle 30 Looped 0-10V Ballasts, Inclusive with 16A relay per channel. 220/110 VAC, 50- 60Hz (Green operated supplied by 24VAC/30mA) output status LED indicator, network health, broadcast address button and Momentary channel button. Can be used in any location that require energy saving, intelligent control


TECHNICAL DATA:

Supply 80-240V, 50/60Hz Single Phase power consumption: 30mA Outputs 6 Relays x 16A Each In 6 Areas (Fully Isolated) 6 X 1-10V outputs Control IO 3 x Advanced RS485 S-BUS serial port links (both train & screw link types) Upgrade IO 1 x mini USB port (to connect to special programming board) User Controls • front panel override switches, Includes ON/OFF/AUTO override switch for each channel • LED status indicator/channel • Diagnostic LED+ BROADCAST • Device can be restored to previous scene or designated scene when power restore Programming • Advanced Software Configuration & Programming Installation • 35mm DIN-Rail Mount Ready • Wall Mount Ready (8P) Compliance CE Mark Low Voltage CE Mark EMC ROHs, CPT, SABS

Internal Protection • Over Heat Protection • Over Load Protection • BUS Rv. Polarity Protection • BUS Short Circuit Protection • Protection delay function (0- 60 minutes) per Channel. Preset and Scenes 6X12 Built in Scenes, and 2X4 Sequence Modes and Logics. maximum operating time: 60 Minutes. Orderly startup delay function in each channel. (0-25 seconds) SBUS DC Supply 24VDC with flexible tolerance between 8-36VDC. Flexible ability to add power supply as to be needed anywhere Supply Terminals Line, 6X Inputs 2.5mm2 - 4mm2 max conductor size Output Terminals 16X OUT for each channel 1 x 4mm2 max conductor size Operating Environment -10º to 45ºC ambient temperature 10% to 93% RH Enclosure & Size Polycarbonate, DIN-rail (8 Unit) Dimensions & Weight W 91mm x L 145mm x H 75mm Packed weight 0.6kg

Diagram

---

 








http://www.smarthomebus.com (Home Automation Control DRP System)
http://www.sunseeker.me (Motorized Shades, Drapes & Lifts)
http://www.zone-audio.com (Multi-room Distributed Audio System)
http://www.resound.me (Theatre Art Speaker and Garden Hi-end Autosystem)
http://www.oursmartwall.com (Specialized in Automation and A&V Industry Social) 

Smart-Bus Dimmer 8ch 1.5Amp /ch - SB-DIM8c1A-DN

Description

DIN-Rail Mount Dimmer 8ch 1.5A /per ch. with scene controller (Overheat, Overload, Surge Protection) single phase both 220/110 VAC, 50-60Hz (Green operated supplied by 24VAC/30mA) Small and elegant with easy labeling space, output status LED indicator, network health, broadcast address button and Momentary channel button. Can be used in any location that require energy saving, intelligent control such as apartment, Villa, Offices, Restaurant, Hotels or factories. Can be Manually Programmed by any Electrician on site without need for PC.

*Gradual Fade Over Time range Enabled, *Scene record from Multi Device Enabled.

Load Compatibility

• Leading edge electronic transformers (Spot/Down Lights++)
• Incandescent lamps
• Track lighting

Mounting Dimensions:

TECHNICAL DATA:

Supply 80-240V, 50/60Hz Single Phase power consumption: 25-35mA Outputs 8 x dimmed outputs (leading edge phase control) at 1.25-1.5A each output channel Maximum Total Load 10A recommended total load Control IO 3 x Advanced RS485 S-BUS serial port links (both train & screw link types) Upgrade IO 1 x mini USB port (to connect to special programming board) User Controls • front panel override switches, Includes ON/OFF/AUTO override switch for each channel • LED status indicator/channel • Diagnostic LED+ BROADCAST Programming • Manual Ch. Pairing Programming Each Channel to a Button on Wall Panels (e.g. DDP, 6B) • Advanced Software Configuration & Programming Compliance CE Mark Low Voltage CE Mark EMC ROHs, CPT, SABS

Internal Protection • Over Heat Protection • Over Load Protection • BUS Rv. Polarity Protection • BUS Short Circuit Protection Preset and Scenes 8X12 Built in Scenes, and 8X4 Sequence Modes and Logics. Installation • 35mm DIN-Rail Mount Ready • Wall Mount Ready (8P) SBUS DC Supply 24VDC with flexible tolerance between 8-36VDC. Flexible ability to add power supply as to be needed anywhere Supply Terminals Line, 3X Neutral. 2 x 2.5mm2 or 1 x 4mm2 max conductor size Output Terminals COM. 1X OUT for each channel 1 x 4mm2 max conductor size Operating Environment -10º to 45ºC ambient temperature 10% to 93% RH Enclosure & Size Polycarbonate, DIN-rail (8 Unit) Dimensions & Weight W 91mm x L 145mm x H 75mm Packed weight 0.7kg

 

http://www.smarthomebus.com (Home Automation Control DRP System)
http://www.sunseeker.me (Motorized Shades, Drapes & Lifts)
http://www.zone-audio.com (Multi-room Distributed Audio System)
http://www.resound.me (Theatre Art Speaker and Garden Hi-end Autosystem)
http://www.oursmartwall.com (Specialized in Automation and A&V Industry Social)  

Trail Click Module

1 Dimmer + 1 Relay Trail Click Module - SB-1D1R-TC
Both DIN-Rail and trail Click Mount, Bus Enabled, Cascadable. Good for Retrofit and for Installations where DB size is Limited. (Works for Both Wired S-BUS G4 and Wireless S-Wave enebled Networks). Consists of: 1 Leading Edge Dimmer Channels 2A and 1 ch. Relay 5A.










1 Dimmer + 2 Relay Trail Click Module - SB-1D2R-TC
Both DIN-Rail and trail Click Mount, Bus Enabled, Cascadable. Good for Retrofit and for Installations where DB size is Limited. (Works for Both Wired S-BUS G4 and Wireless S-Wave enebled Networks). Consists of: 1 Leading Edge Dimmer Channels 2A and 2 ch. Relay 5A.









1 Dimmer + 1 Relay + 1 Fan Trail Click Module - SB-1D1R1F-TC
Both DIN-Rail and trail Click Mount, Bus Enabled, Cascadable. Good for Retrofit and for Installations where DB size is Limited. (Works for Both Wired S-BUS G4 and Wireless S-Wave enebled Networks). Consists of: 1 Leading Edge Dimmer Channel 2A and 1 ch Relay 5A.








2 Relay Trail Click Module - SB-2R-TC 
Both DIN-Rail and trail Click Mount, Bus Enabled, Cascadable. Good for Retrofit and for Installations where DB size is Limited. (Works for Both Wired S-BUS G4 and Wireless S-Wave enebled Networks). Consists of: 2 channel Relays rated 5A per Channel








3 Relay Trail Click Module - SB-3R-TC
Both DIN-Rail and trail Click Mount, Bus Enabled, Cascadable. Good for Retrofit and for Installations where DB size is Limited. (Works for Both Wired S-BUS G4 and Wireless S-Wave enebled Networks). Consists of: 3 channel Relays rated 5A per Channel.












HVAC Trail Click Module - SB-HVAC-TC
Both DIN-Rail and trail Click Mount, Bus Enabled, Cascadable. Good for Retrofit and for Installations where DB size is Limited. (Works for Both Wired S-BUS G4 and Wireless S-Wave enebled Networks). Consists of: HVAC Module for Single Stage, and 2 fan Speed only

http://www.smarthomebus.com (Home Automation Control DRP System)
http://www.sunseeker.me (Motorized Shades, Drapes & Lifts)
http://www.zone-audio.com (Multi-room Distributed Audio System)
http://www.resound.me (Theatre Art Speaker and Garden Hi-end Autosystem)
http://www.oursmartwall.com (Specialized in Automation and A&V Industry Social) 

S-Wave Trail Click Module - SB-SWave-TC

Descripition

S-wave is a new generation home automation wireless Mesh technology that enables the Direct conversion of the Smar t-Bus Automation products to connect with each other wirelessly.
S-wave is designed to be simple to use, affordable and to offer Retrofit high quality products with flexible functionality.
S-wave is the device you can connect to the wired Smart-Bus products and to Trail Click mini modules to make them work wirelessly in an interactive mesh environment.
This new technology brings the needed: Luxurious, reliable, affordable and swiftly implementable automation to your door Step.

TECHNICAL DATA:

Inputs 4-Dry Inputs (Volt Free) NO/NC Internal Assignment enabled using Software setup Control types * RS485 S-BUS serial port links *Three touch switch *IR remote (5-7 meters) *RF by other device Upgrade IO 1 mini USB port User Controls *LED status indicator/channel *Diagnostic LED+ BROADCAST Operation Protection *Over load Protection *Over temperature Protection *Load short Protection *BUS Rv. Polarity Protection *BUS Short Circuit Protection

AC Supply 85-264VAC SBUS DC Supply 24VDC with flexible tolerance between 8-36VDC. Flexible ability to add power supply as to be needed any where Power consumption: 15mA Operating Environment 0º to 45ºC ambient temperature 20% to 93% RH RF feature: Bandwidth :433MHZ Sensitivity = -121 dBm Output power range: +20 dBm Max Power consumption: 18.5mA receive 85 mA @ _20 dBm transmit Data rate = 100 kbps Dimensions: L 46.06mm X W 23mm X H 50mm

http://www.smarthomebus.com (Home Automation Control DRP System)
http://www.sunseeker.me (Motorized Shades, Drapes & Lifts)
http://www.zone-audio.com (Multi-room Distributed Audio System)
http://www.resound.me (Theatre Art Speaker and Garden Hi-end Autosystem)
http://www.oursmartwall.com (Specialized in Automation and A&V Industry Social) 

S-Wave Wifi Bridge - SBW-Bridge-FL

Extremely Elegant Table Top Box. Enabled with Swave-III Technology and
Range up to 1000 Meters LOS. Ready with S-BUS, WiFi and LAN connections. Helps Create Complete Home Mesh as Plug and Play. (Works Direct with SWave Scan Software.)
http://www.smarthomebus.com (Home Automation Control DRP System)
http://www.sunseeker.me (Motorized Shades, Drapes & Lifts)
http://www.zone-audio.com (Multi-room Distributed Audio System)
http://www.resound.me (Theatre Art Speaker and Garden Hi-end Autosystem)
http://www.oursmartwall.com (Specialized in Automation and A&V Industry Social

Smart Power Strip 8 with S-Wave - SBW-PStrip8-FL

Smart Power Strip 8 Features:
(1) Wi-Fi enabled (Creates its own direct, Wi-Fi zone included)
(2) 6 Sockets, 5Amp each (On/Off Control)
(3) 2 Lighting assigned Dimmable Sockets, 1Amp (Increase/Decrease Intensity)
(4) S-wave Bridge enabled & S-BUS Ready
(5) IR Hand Held Remote enabled (IR Eye)
(6) Universal Plug Sockets Enabled to fit maximum Countries standard
(7) Scheduling enabled
(8) Create your own Group or Moods
(9) Master Power Switch On/Off
(10) Installs in 5 seconds / No tools needed
(11) Plug n Play (True DIY)
Smart Power Strip 8 can be controlled by:

• Wifi enabled devices (Smart Phone & Tablets)
• Handheld Remote Control
• S-BUS Cabled Network as S-BUS Device
• Swave Wireless Bridge as Wireless Device

Installation in 4 Steps:
(1) Download Free App IOS or Android.
(2) Plug in the power.
(3) Connect to SMART-P8 Wi-Fi Network/Remote.
(4) Control.

Specifications:
110VAC - 220VAC
50Hz - 60Hz
Wi-Fi Bandwidth: 2.4G
Wi-Fi Users: 32 device
Dimmers: 2 x 1Amp each
Relays: 6 x 5Amp each
IR Distance: 3-6 meters
Maximum Total Load: 10Amp
Heat Sink: Internal

http://www.smarthomebus.com (Home Automation Control DRP System)
http://www.sunseeker.me (Motorized Shades, Drapes & Lifts)
http://www.zone-audio.com (Multi-room Distributed Audio System)
http://www.resound.me (Theatre Art Speaker and Garden Hi-end Autosystem)
http://www.oursmartwall.com (Specialized in Automation and A&V Industry Social